Insulation Company in Burlingame, CA
Good insulation in Burlingame is not a luxury add-on. It is the difference between a house that holds heat on a foggy July evening and one that leaks it through 70-year-old attic batts. We are Alden Attic Insulation, an independently owned and operated company held to The Garrison Standard, and we handle attic insulation, blown-in insulation, and insulation removal for homeowners across Burlingame. Most jobs run $1,450 – $2,950 depending on square footage and current R-value, and every quote is written before any work begins. Call us at (559) 245-9792 and a live person answers, 24/7.
Why Burlingame Homes Are Different
Burlingame’s mild coastal climate makes it easy to forget the attic. But fog is relentless here. Homes east of El Camino Real, up in the windy hills, sit in damp marine air most summer mornings, and that moisture finds its way into under-insulated attics. What starts as a comfort problem becomes rust on ductwork, condensation on sheathing, and higher heating bills from October through March.
The housing stock compounds it. Early 20th-century Craftsman and Spanish Revival homes in Burlingame were built before wall insulation was code, and many still have nothing between the plaster and the studs. The 1940s-to-1960s ranch tracts that fill the flats often have R-11 batt or a thin layer of blown-in material, which is about a third of what the Department of Energy recommends for this climate zone. Burlingame homeowners are not replacing insulation that failed catastrophically; they are discovering it was never adequate in the first place.
In the Easton Addition, where 1920s stucco homes dominate, balloon framing means wall cavities run open from foundation to attic. Installers drilling for dense-pack cellulose routinely find decades of settled debris and rodent damage in those bays. That is a Burlingame-specific reality: the house looks fine from the street, but the thermal envelope has been leaking since the Hoover administration.
Our Main Burlingame Services
Burlingame homeowners call us most often for two situations: attics that need proper insulation, and attics where the existing material has to come out before anything new goes in.
Attic Insulation in Burlingame
Older Burlingame attics usually have thin, compressed batts that barely register an R-value anymore. We remove what is there if needed, air-seal the floor penetrations, and install new insulation sized for the home’s framing and the coastal conditions. In hillside homes with vaulted ceilings, we work around the limited access these older structures often have. See Attic Insulation in Burlingame for the full breakdown of materials, R-values, and what a typical Burlingame attic job involves.

Blown In Insulation in Burlingame
Blown-in insulation makes sense for Burlingame attics with irregular joist spacing, low clearance, or existing layers that just need topping off. The material fills gaps that batts cannot, which matters in older Burlingame homes where framing is anything but square. We often install blown-in over existing batts in ranch-style homes to bring total R-value up without a full tear-out. Read the specifics at Blown In Insulation in Burlingame, including how we handle access in tight attic spaces.

Insulation Removal in Burlingame
When attic insulation is water-damaged, rodent-infested, or simply dust-filled from decades of coastal air, removal is the first step. Burlingame’s older homes frequently need this before any new material goes in, especially after roof leaks or when homeowners find evidence of pests. We vacuum out the old material, clean the deck, and prepare the space for fresh insulation. Details are at Insulation Removal in Burlingame, including what removal costs and how long it takes in a typical Burlingame attic.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Burlingame
We install and remove insulation using products from CertainTeed, Icynene, and GreenFiber, along with five other industry-respected brands. You can research exactly what goes into your attic before approving anything. See our brands for the full list and material specifications.
Pricing for Insulation Company in Burlingame, CA
| Service | Typical range in Burlingame |
|---|---|
| Attic insulation (full install) | $1,450 – $2,950 |
| Air sealing + attic insulation | $1,850 – $3,400 |
| Attic insulation upgrade (top-off) | $950 – $1,850 |
| Blown-in insulation (attic) | $1,250 – $2,600 |
| Blown-in insulation (walls, dense-pack) | $1,850 – $4,200 |
| Insulation removal (full attic) | $1,000 – $2,200 |
| Insulation removal + new install | $2,300 – $4,800 |
Burlingame prices skew toward the upper end when attics have tight access, steep roof pitches, or need rodent remediation before new material goes in. Hillside homes east of El Camino Real often add a day of labor for material staging and debris removal. Whatever the number, you get it in writing before a tool comes off the truck, and the written price is the invoice price.
Neighborhoods We Serve in Burlingame
We work across Burlingame, from the flats near Broadway to the hills above Hillsborough. Each area has its own aging patterns: Easton Addition homes need wall retrofits, the ranch tracts near Burlingame Avenue need attic top-offs, and the newer builds off Skyline need air sealing more than insulation volume.
- Easton Addition
- Lyon-Hoag
- Ray Park
- Burlingame Hills
- Mills Estate
Most Burlingame jobs are scheduled within 3 – 5 business days, and we can usually get a crew out same-week for removal emergencies.
Service Area – Cities Near Burlingame
Alden Attic Insulation serves homeowners across the mid-Peninsula. If you are in a neighboring city, the same Garrison Standard applies. We work regularly in San Mateo, CA, Millbrae, CA, South San Francisco, CA, and Pacifica, CA. Dispatch and scheduling for all of these areas is coordinated from the San Francisco Bay Area office.
Serving Burlingame, CA - Our Local Coverage Area
We’re based in the Burlingame area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation Company in Burlingame
Most Burlingame inspections are scheduled within 3 – 5 business days. If you have standing water, rodent damage, or exposed wiring in the attic, call (559) 245-9792 and we will mark it urgent; live dispatchers are on the line 24/7, not a voicemail.
Most attic insulation and removal jobs in Burlingame do not require a city permit. Wall retrofits, especially in older homes with balloon framing, sometimes do. We verify requirements with the city before scheduling so there are no surprises at inspection.
Yes. Some neighborhoods in Burlingame have HOA or historical district restrictions on exterior work, and insulation is interior work in most cases. If your project touches exterior walls, we coordinate with your HOA’s architectural requirements before starting.
Insulation Company in Burlingame? Call Alden Attic Insulation.
If your Burlingame attic has original 1960s batts, or your walls leak heat every foggy morning, we can tell you exactly what is there, what it will cost to fix, and what the written guarantee covers. Call (559) 245-9792 for a free estimate. A live person answers, and the price you approve is the price on the invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60-minute.
- 4You approve before work beginsNothing starts until you say go.
What Burlingame Customers Say
"Attic was uneven before and now every room is the same temperature."
- Gil N."Removed rodent-damaged insulation, sanitized, and replaced it. Thorough and honest."
- Sue M."Tidy crew. Vacuumed the hall and covered the hatch."
- Bea J.